Skip to content

Free tool

Aircraft part condition code lookup

Condition codes tell a buyer what state a part is in before they see it. NE is factory new, NS new surplus, OH overhauled, SV serviceable and AR as-removed. Search any code or alternative spelling below to see what it means, what paperwork usually comes with it, and whether it is normally sold with a warranty.

13 codes. Alternative spellings such as OHC, RP or AS-IS find their code too.

Condition grades

NE

New

Factory new. Made by the manufacturer or under its approval, never installed, and sold through the manufacturer or its distribution chain.

Paperwork buyers expect
Manufacturer's certificate of conformity, often with an FAA 8130-3 or EASA Form 1 issued at production.
Also written
NEW, FACTORY NEW, FN
Usually sold with a warranty
Yes, on the seller's terms
NS

New Surplus

New and never installed, but bought as someone else's surplus (an airline's or a shop's excess stock) rather than from the manufacturer. Shelf-life items may need checking.

Paperwork buyers expect
The original manufacturer's certificate where it exists, plus a trace back to the original purchase.
Also written
NEW SURPLUS
Usually sold with a warranty
Yes, on the seller's terms
OH

Overhauled

Taken apart, cleaned, inspected, repaired as needed, reassembled and tested to approved standards (the manufacturer's overhaul instructions) by an approved repair station. 14 CFR 43.2 sets when a part may be called overhauled.

Paperwork buyers expect
An airworthiness release from the shop: FAA 8130-3, EASA Form 1 or both (dual release).
Also written
OHC, OV, OVERHAULED, OVERHAUL
Usually sold with a warranty
Yes, on the seller's terms
REP

Repaired

Returned to service by an approved repair station that fixed specific defects. Less work than an overhaul, so ask what was done.

Paperwork buyers expect
An airworthiness release from the repair station, with the work performed listed.
Also written
RP, REPAIRED, REPAIR
Usually sold with a warranty
Yes, on the seller's terms
MOD

Modified

Changed to a different configuration, usually under a service bulletin, so the part number or dash number may now differ from the original.

Paperwork buyers expect
An airworthiness release that names the modification or service bulletin.
Also written
MO, MODIFIED, MODIFICATION
Usually sold with a warranty
Yes, on the seller's terms
SV

Serviceable

Usable, with time or cycles remaining, but not overhauled. Either removed from an aircraft in working order or bench-checked by a repair station. Buyers usually ask for a recent shop tag before they install it.

Paperwork buyers expect
Sometimes a shop release after inspection or test, sometimes only the removal records. Ask which.
Also written
SVC, SERVICEABLE, AIRWORTHY, INSPECTED
Usually sold with a warranty
Yes, on the seller's terms
INS/TST

Inspected/Tested

Inspected and functionally tested by an approved repair station and found serviceable without repair.

Paperwork buyers expect
An airworthiness release stating inspection and test.
Also written
INS-TST, INS TST, INS/TEST, INS, IN, IT, TST, TS, TEST, TESTED, INSPECT, INSPECTION, INSPECTED/TESTED, INSPECTED & TESTED
Usually sold with a warranty
Yes, on the seller's terms
AR

As-Removed

As-Removed: taken off an aircraft and not inspected, tested or repaired since. Sold as it is, with no statement that it works, and also used for parts removed because their time or cycles ran out. It has to go through a shop before it can be fitted. AR does not mean "airworthy release".

Paperwork buyers expect
Removal records and traceability (who removed it, from which aircraft) where available.
Also written
AS REMOVED, AS-REMOVED, USED, AS-IS, AS IS, ASIS, AS_IS
Usually sold with a warranty
No

Not a grade: cores and scrap

US

Unserviceable

Unserviceable: known not to be airworthy. Traded as a core for repair or overhaul, and priced as one.

Paperwork buyers expect
Often an unserviceable tag giving the reason for removal or the failed test.
Also written
U/S, U-S, UNSERVICEABLE, UNSERVICABLE, UNSERV
Usually sold with a warranty
No
SCR

Scrap

Scrap: condemned and not to be returned to service. It has no further use as a part, so it cannot be quoted.

Paperwork buyers expect
A scrap or condemnation record from the shop or the owner.
Also written
SC, SCRAP, SCRAPPED
Usually sold with a warranty
No

Other codes you may see

IR

Inspected/Repaired

Inspected and repaired. Used by some shops and sellers for a part that needed a repair after inspection; treat it like Repaired and check the release.

AI

As Inspected

As inspected. Wording varies between sellers. Ask what inspection was done and whether a release came with it.

RB

Rebuilt

Rebuilt. An older term, mostly for parts restored by the manufacturer or to a rebuild standard. Ask for the release that came with it.

How to read a condition code

A condition code is a short label, and the paperwork is what backs it up. A part listed as OH without a repair station's release is not something you can install. Before you buy or quote, check three things:

  1. The code, and whether it is the one the RFQ asked for. An RFQ for OH is not answered by an SV part.
  2. The release document: a manufacturer's certificate for new parts, an FAA 8130-3 or EASA Form 1 for work done by a repair station.
  3. Traceability: who the part came from, and for used parts, which operator removed it.

Spellings vary between marketplaces and suppliers. This list shows the common ones under each code, so OHC, RP and AS-IS all find their place. For the background on each grade and how they compare, read the aircraft part condition codes guide. When the part ships, the condition goes on the paperwork; the ATA 106 form generator fills one in.

Frequently asked questions

What does AR mean on an aircraft part?

AR means As-Removed: the part came off an aircraft and has not been inspected, tested or repaired since. It is sold as it is, usually without a warranty, and must go through a repair station before it can be installed. It does not mean airworthy release.

What is the difference between NE and NS?

Both are new and never installed. NE (factory new) comes from the manufacturer or its distribution chain. NS (new surplus) was bought as another company's excess stock, so the trace goes back through that company rather than straight to the manufacturer.

Is overhauled better than serviceable?

Usually, yes. An overhauled (OH) part has been taken apart, inspected, repaired as needed and tested to the manufacturer's overhaul instructions. Serviceable (SV) only says the part is usable with time or cycles remaining, and it may be close to its next overhaul.

Is RP the same as REP?

Yes. Both mean repaired. ILSmart listings and supplier quotes often write RP; other forms write REP. The same goes for OH and OHC (overhauled), and IN/TST, INS/TST and IT (inspected and tested).

Who decides which condition code a part gets?

No single law sets the list. The codes are trade convention, used on marketplaces and quotes. What makes a condition stick is the paperwork: the manufacturer's certificate for new parts, or a repair station's airworthiness release (FAA 8130-3, EASA Form 1) for overhauled, repaired and tested parts.

Quote in the condition the buyer asked for

Fenavia reads the condition on each incoming RFQ, however the buyer spelled it, and keeps a separate price for each condition of a part. When the order ships, the ATA 106 takes the condition from the inventory record, so nobody types it twice.

Book a demo