What is ATA Spec 106?
Spec 106 is published and sold by Airlines for America (A4A), the US airline trade association that owns the ATA specifications. A4A describes it as the minimum requirements for the quality program of a new parts or materials supplier and of a surplus parts dealer. The current revision is 2023.1; earlier issues date from 1993, 1996, 2000 and 2001.
Most people who say “ATA 106” mean the form, but the form is a small part of the document. The Aviation Suppliers Association (ASA) notes that only 8 of the specification's 50 pages deal with it.
What is on the ATA 106 form?
The full layout is in the specification itself, which A4A sells; we have not reproduced it here. ASA's public summaries refer to blocks such as eligibility (block 9), remarks (13A), the last certificated agency (13C), new parts verification (14) and a non-incident confirmation (18B), which ASA says was added in the 2023.1 revision.
In practice the form identifies the seller and the buyer, the parts (part number, serial number, description, quantity and condition), where each part was obtained and who last certified it, and carries the seller's signature.
When do parts traders use an ATA 106 form?
Mostly when a buyer asks for it. FAA guidance puts the burden of asking on the buyer:
- AC 21-29D (5.2.2) says purchasers should request traceability to approved design and production approval on their purchase orders for all parts meant for type-certificated products.
- AC 20-62E (14.b) says it is the installer's responsibility to request documentation establishing traceability to a production approval holder.
- For distributors in the FAA's voluntary accreditation program, AC 00-56B sets traceability by a documentation matrix (5.h and Appendix 1). For a used part without a return to service, that includes a certified statement from the seller about the part's identity and condition.
An ATA 106 form is one common way for a trader to give that statement. ASA says it has never required the form, but many accredited distributors use it to make the certification statements its ASA-100 quality standard asks for.
How is an ATA 106 form different from an airworthiness release?
An ATA 106 form says where a part came from. A release certificate says the part conforms to its approved design or has been returned to service after maintenance. FAA AC 20-62E (14.b) puts it plainly: distributors that are not production approval holders cannot certify the airworthiness of the parts they sell.
| ATA 106 form | FAA 8130-3 / EASA Form 1 | |
|---|---|---|
| Published by | Airlines for America, as an industry specification | The FAA and EASA, under their regulations |
| Completed by | The seller, often a trader or distributor | A production approval holder, an authority or its designee, or an approved maintenance organization |
| States | Where the part came from and who last certified it | Conformity to approved design, or return to service after maintenance |
| Can it certify airworthiness? | No | It is the airworthiness release |
A serviceable part sold by a trader usually ships with both: the shop's release certificate, and the trader's ATA 106 form tracing the part back to that shop. See FAA 8130-3 vs EASA Form 1 for the release side.
Questions
Does the FAA require the ATA 106 form?
The FAA advisory circulars on replacement parts, distributor accreditation and suspected unapproved parts do not mention ATA Spec 106, and ASA says it has never required the form. Many accredited distributors use it to meet ASA’s own ASA-100 standard.
Who fills in the ATA 106 form?
The seller fills it in for the parts it is selling, naming where they came from, and the buyer keeps it with the part’s other records.
Does an ATA 106 form make a part airworthy?
No. FAA AC 20-62E says distributors that are not production approval holders cannot certify the airworthiness of the parts they sell. That is the job of a release certificate such as FAA Form 8130-3 or EASA Form 1.
What is the current revision of ATA Spec 106?
Airlines for America lists revision 2023.1 as current. Earlier issues were 1993, 1996, 2000.1 and 2001.1.
Sources
- Airlines for America: Spec 106, Sources and Approved Parts Qualification Guidelines, Revision 2023.1
- ASA: ATA Spec 106 revision (2023)
- ASA Member Bulletin, June 2017: Last Certificated Agency
- ASA: ASA-100 quality standard
- FAA AC 20-62E, Eligibility, Quality, and Identification of Aeronautical Replacement Parts
- FAA AC 00-56B, Voluntary Industry Distributor Accreditation Program
- FAA AC 21-29D, Detecting and Reporting Suspected Unapproved Parts