What do the condition codes mean?
These are the grades most quotes use, best first. The order is the one we rank offers by when comparing quotes.
| Code | What it means on a quote |
|---|---|
| NENew | Never installed, bought from the manufacturer or its distributor, with the manufacturer’s own paperwork.Also written: NEW, FN, Factory New |
| NSNew Surplus | Never installed, but sold as surplus rather than by the manufacturer: excess stock from an operator, a shop or another trader. Paperwork varies, so ask how far back it goes. |
| OHOverhauled | Taken apart, cleaned, inspected, repaired as necessary, reassembled and tested by a maintenance organization, and released with a maintenance release.Also written: OHC, OV |
| REPRepaired | A defect was fixed and the unit released as repaired, without a full overhaul. The shop’s report says what was done.Also written: RP |
| MODModified | Changed from its original configuration, usually to a later standard, and released as modified. Check that the new part number or modification status suits the buyer’s aircraft.Also written: MO |
| SVServiceable | Usable, with time or cycles remaining, but not overhauled. Ask what supports that: a recent shop release after inspection or test, or only the removal records.Also written: SVC |
| INS/TSTInspected/Tested | Inspected and bench-tested by a shop and released, with no repair or overhaul. The release says what the shop actually checked.Also written: IT, IN, TS, INS |
| ARAs-Removed | Exactly as it came off the aircraft, with no shop inspection, test or release since removal. Buyers treat it as a core for repair or overhaul, and it is usually sold without a warranty.Also written: AS-IS, AS IS |
To check a single code or spelling, use the condition code lookup.
Which condition terms are defined by regulation?
Only a few. Release certificates have a status block (block 11) that takes one of a short list of words, and those words line up with some of the codes:
- For a maintenance release, FAA AC 43-9D (Appendix B, Table B-1) and EASA's Form 1 instructions in Part-M Appendix II use Overhauled, Repaired, Inspected/Tested and Modified. That is OH, REP, INS/TST and MOD.
- For a production release, FAA Order 8130.21J uses New, Prototype and Used.
- 14 CFR 43.2 sets when a part may be described as overhauled (disassembled, cleaned, inspected, repaired as necessary, reassembled and tested to approved standards) or rebuilt (the same, but tested to the same tolerances and limits as a new item).
NS, SV and AR are marketplace codes, not status words on either certificate. FAA AC 20-62E (14.a) makes a similar point about sales terms such as “like-new”: they do not establish a part's legal serviceability or condition.
How does ILSmart define the codes?
ILS defines five codes for inventory listings, in its member help and its inventory upload guide. In short:
- NE: bought new from the manufacturer or a distributor.
- NS: tagged as zero time or cycles, with or without traceability or certification.
- OH: overhauled to zero time or cycles and certified by a repair station approved by an authority such as the FAA.
- SV: removed from an aircraft with time or cycles remaining, or removed and bench-checked by an authorized repair station or inspector.
- AR: as removed from an aircraft, including items that have used up their time or cycles, with or without a tag.
Buyers on other marketplaces, and in their own emails, mostly use the same codes, but not always the same spelling. OHC, OV and OH all mean overhauled; RP and REP both mean repaired.
Does AR mean airworthy?
No. AR stands for as-removed. An AR part is sold as it came off the aircraft, without inspection, test or release since removal, and it is usually sold without a warranty. Treat it as a core that needs shop work and a new release.
FAA AC 00-56B (Appendix 1) expects a seller of a used part without approval for return to service to describe its condition accurately, with a term such as “as-is”. AR is that kind of term. Read it as “airworthy” and a core gets quoted as if it could be fitted.
What other codes will you see?
Suppliers also quote conditions that are not sellable grades. These are the ones we see most:
| Code | What it means on a quote |
|---|---|
| USUnserviceable | Failed inspection or test, or known to be faulty. It is sold as a core for repair, if at all. |
| SCRScrap | Not to be returned to service. A scrapped part has no use as a part, so it cannot be quoted. |
| IRInspected/Repaired | Inspected, and repaired where the inspection found a defect. |
| AIAs Inspected | Looked at, but not tested or released. Read it as a note, not a grade. |
| RBRebuilt | Overhauled to the same tolerances and limits as a new item. US rules set what may be called rebuilt. |
How do you compare quotes in different conditions?
- Turn every spelling into one code. Put OHC, OV and OH in the same column before comparing prices.
- Compare like with like. An OH price and an AR price are different offers. Comparing them is how an AR core ends up looking cheap.
- Check the paperwork against the code. An OH quote should come with an overhaul release, and an SV quote with something that supports it. See 8130-3 vs EASA Form 1.
- Ask about tag date and trace. Two SV parts with different paperwork are not the same offer either. See back-to-birth traceability.
Fenavia maps the spellings above to one code on stock and quote lines, and ranks supplier offers in the order of the first table, so quotes written in different conventions line up.
Questions
What is the difference between NE and NS?
Both are never-installed parts. NE is bought new from the manufacturer or its distributor; NS is surplus stock from someone else, such as an operator or another trader, and its paperwork varies.
Is overhauled the same as rebuilt?
No. Under 14 CFR 43.2, a rebuilt part is tested to the same tolerances and limits as a new item, while an overhauled part is tested to approved standards and technical data.
What does SV mean on a quote?
SV means serviceable: usable, with time or cycles remaining, but not overhauled. It is a marketplace code, not a status term on a release certificate, so ask what paperwork supports it.
Does AR mean airworthy?
No. AR means as-removed: the part is sold as it came off the aircraft, with no inspection, test or release since. It is usually sold without a warranty.
Sources
- 14 CFR 43.2, Records of overhaul and rebuilding
- FAA AC 43-9D, Maintenance Records and FAA Form 8130-3 Return to Service (Appendix B)
- FAA Order 8130.21J, Completion of FAA Form 8130-3 under Part 21
- EASA Easy Access Rules for Continuing Airworthiness (Part-M Appendix II, EASA Form 1)
- FAA AC 20-62E, Eligibility, Quality, and Identification of Aeronautical Replacement Parts
- FAA AC 00-56B, Voluntary Industry Distributor Accreditation Program
- ILS member help: Add inventory item (condition codes)
- ILS: Uploading files to ILS (condition codes)