Skip to content

Free tool

ATA 106 form generator

Fill in the ATA Spec 106 Part or Material Certification Form below and download it as a PDF or print it. It covers the seller, the part lines, the traceability block and the new or used parts verification. You don't need an account, and the form never leaves your browser.

You are responsible for what this form says. The tool lays out the fields you type. It does not check part numbers, traceability or condition, and it is not legal or regulatory advice. Sign only what you can support with records.

Form fields

Seller (blocks 2 to 5)
Parts (blocks 6 to 12)
Item 1
Remarks and traceability (block 13)
Pre-filled with a common incident and origin statement. Change it to what you can actually certify.
Who you bought the part from.
Manufacturer, or the last operator for used parts.
e.g. the repair station and FAA/EASA release.
Verification and signature (blocks 14 to 21)

Set from the first line: NE and NS sign block 14, every other condition signs block 18.

The signature box is left empty. Print the form and sign it by hand.

Preview

Nothing you type leaves your browser. Fenavia does not receive or keep it.

Part or Material Certification Form
ATA Specification 106
2. Seller's Name:
3. Reference #
4. Organization:
5A. Seller's Contract #:
5B. Buyer's PO #:
6. Item7. Description8. Part Number9. App. Code10. Qty11. Serial Number12. Status
11
13A. Remarks:
AS PER THE BEST OF OUR KNOWLEDGE NONE OF THE ABOVE PARTS HAVE BEEN SUBJECTED TO SEVERE STRESS OR HEAT (AS IN A MAJOR ENGINE FAILURE, ACCIDENT OR FIRE). WE CERTIFY THAT EACH ARTICLE ORDERED IS NOT OF U.S. GOVERNMENT OR MILITARY SURPLUS ORIGIN.
13B. Obtained from:
Traceable to:
13C. Last Certified Agency:
14. New Parts/Material Verification:
THE FOLLOWING SIGNATURE ATTESTS THAT PART(S) OR MATERIAL(S) IDENTIFIED ABOVE WAS (WERE) MANUFACTURED BY A FAA PRODUCTION APPROVAL HOLDER (PAH), OR TO AN INDUSTRY COMMERCIAL STANDARD.
18. Used, Repaired or Overhaul Parts Verification:
THE FOLLOWING SIGNATURE ATTESTS THAT DOCUMENTATION SPECIFIED ABOVE OR ATTACHED IS ACCURATE WITH REGARD TO THE ITEM(S) DESCRIBED.
15. Signature
16. Name
17. Date
19. Signature
20. Name
21. Date
NOV 22, 2026
NOTICE: The above signature binds the seller and the SIGNER to the accuracy of the information provided in the FORM. Should the information provided in this Form contain inaccuracies or misrepresentations, the signer and SELLER may be liable for damages and be subject to criminal prosecution under state and federal law.

How the ATA 106 generator works

  1. Fill in the seller blocks: your company, reference number, address and the contract and PO numbers.
  2. Add a line for each part: part number, description, application code, quantity, serial or batch number and condition. Up to 20 lines fit on the form.
  3. Fill in block 13: where you obtained the part, what it is traceable to, and the last certifying agency.
  4. Choose the verification. New and new-surplus parts sign block 14; used, repaired and overhauled parts sign block 18. The tool picks one from the first line's condition and you can change it.
  5. Download the PDF or print it, then sign the empty signature box by hand.

The PDF is drawn in your browser from the preview, so it looks exactly like what you see. If the download does not work in your browser, use Print and choose "Save as PDF". That also gives you selectable text.

What goes in each block

BlockWhat to enter
2. Seller's nameThe legal name of the company selling the part.
3. Reference #Your own reference for the transaction, often your purchase order to the source.
4. OrganizationThe seller's address.
5A / 5BYour contract or invoice number, and the buyer's purchase order number.
6 to 12One row per part: description, part number, application code, quantity, serial or batch number, and condition (NE, OH, SV, AR…).
13A. RemarksStatements you can certify, such as no exposure to severe stress or heat, and no government or military surplus origin.
13B / 13CWho you obtained the part from, what it is traceable to, and the last agency that certified it.
14 to 17New parts verification, signature, name and date.
18 to 21Used, repaired or overhauled parts verification, signature, name and date.

Not sure which condition code to use? The condition code lookup lists what each code means and the paperwork that usually goes with it.

Frequently asked questions

What is an ATA 106 form?

It is the Part or Material Certification Form from ATA Spec 106, the industry specification for documenting where aircraft parts come from. The seller fills it in to state who the part was obtained from, what it is traceable to, its condition, and who last certified it.

Is an ATA 106 the same as an FAA 8130-3 or EASA Form 1?

No. An 8130-3 or EASA Form 1 is an airworthiness release issued by a production approval holder or an approved repair station. An ATA 106 is the seller's own traceability statement. Buyers often ask for both, and an ATA 106 never replaces a release.

When do I sign block 14 and when block 18?

Block 14 is for new parts or material, made by an FAA production approval holder or to an industry commercial standard. Block 18 is for used, repaired or overhauled parts and confirms the documents listed or attached are accurate. Sign only the block that applies.

Does Fenavia keep what I type?

No. The form and the PDF are made in your browser. Nothing you type is sent to Fenavia or saved, so keep your own copy of the PDF.

Can I put my company logo on the form?

Not in the free tool, which prints a plain form. In Fenavia, ATA 106 forms generated from a sales order carry your company logo and signature.

Stop filling in the ATA 106 by hand

In Fenavia the ATA 106 is generated from the sales order. Part number, serial, condition, quantity and traceability come from the inventory record, and your logo and signature from your settings.

Book a demo