Skip to content
Fenavia

Guide

Back-to-birth traceability for aircraft parts

Back-to-birth traceability means a part's records run unbroken from manufacture to today: every owner, installation, removal and shop visit, with the hours and cycles in between. Buyers ask for it mostly on life-limited parts. The rules themselves require something narrower: a reliable record of each life-limited part's current life status.

What does back-to-birth traceability mean?

It is a trade term for a complete history. For a life-limited part, that history is what proves how much life is left. A part with 8,000 cycles remaining is only worth that if the records add up to it.

The phrase is not a regulatory one. EASA says in an FAQ that “back to birth” is not used in European regulations, and the FAA's Chief Counsel has used it to explain what the rules do not require (see below).

What do the rules require for life-limited parts?

The requirements are about current life status, and about not losing it when a part changes hands.

Rule text as published on eCFR and in EASA's Easy Access Rules for Continuing Airworthiness.
RuleWho it applies toWhat it requires
14 CFR 43.10Anyone removing a life-limited part, and anyone who later sells itControl the part so it cannot be installed past its limit (by records, tag, marking, segregation, mutilation or another accepted method), and pass the record, tag or mark on with the part when it is sold, unless it is mutilated
14 CFR 91.417(a)(2)Aircraft owners and operatorsKeep the current status of life-limited parts of each airframe, engine, propeller, rotor and appliance
14 CFR 121.380(a)(2)Part 121 air carriersThe same current-status record for life-limited parts
EASA M.A.305(d) and (e)Aircraft under Part-MCurrent status of life-limited parts, including the life each has accumulated, and an in-service history record for each life-limited part
EASA ML.A.305(b)Aircraft under Part-MLLog cards for any service-life-limited component, as appropriate

Section 43.10 also defines life status: the accumulated cycles, hours or any other mandatory replacement limit of a life-limited part.

Do the rules require back-to-birth records?

Not as such. In a 2009 interpretation letter, the FAA's Office of the Chief Counsel agreed that the regulations do not require back-to-birth records to determine a life-limited part's status. The records must show that status “with a sufficient degree of certainty”. Quoting its own 1992 interpretation, the FAA said an audit trail back to origin would be needed only where the records are so incomplete that the time used cannot be determined accurately.

EASA's acceptable means of compliance for M.A.305 similarly accept conservative methods to manage missing historical periods when establishing a life-limited part's status.

Your buyer's quality team, or the lessor whose engine it is, may ask for more than the rules do, and the contract decides what you have to supply.

What should a trader collect before buying a life-limited part?

  1. A life status statement: hours and cycles used and remaining against each limit, by serial number.
  2. The history behind it: the records that add up to that status. FAA AC 20-62E (10.b(3)) lists historical records substantiating time and cycles among the information to obtain for a used part.
  3. The tag, mark or record required by 43.10, which the seller has to pass on with the part.
  4. The last release certificate from the shop that last worked on it. See 8130-3 vs EASA Form 1.
  5. The seller's trace document, often an ATA 106 form, naming where they got it.
  6. An explanation of any gap, asked for before you buy, while a missing period can still change the price.

Accredited distributors have one more reason to collect all this: the ASA-100 quality standard (12.D) requires records for all life-limited parts, traceable to an FAA-certificated or other acceptable source.

How does Fenavia keep trace with the part?

Fenavia records the traceability source, traceable-to and last certified agency on each stock item when you buy or receive it, keeps them with the part through the sale, and prints them on the ATA 106 form generated from the sales order. It does not calculate life limits; the status sheet and history stay the documents you collect and pass on.

Questions

Does the FAA require back-to-birth records?

Not as a rule. In a 2009 interpretation the FAA Chief Counsel said the regulations do not require back-to-birth records to determine a life-limited part’s life status; the records must show that status with a sufficient degree of certainty.

Does EASA require back-to-birth records?

EASA says the term “back to birth” is not used in European regulations. Its rules require the current status of each life-limited part, including the life it has accumulated, and an in-service history record behind it.

What if part of a life-limited part’s history is missing?

EASA’s acceptable means of compliance accept conservative methods to manage missing historical periods. The FAA has said an audit trail back to origin is needed only where the records are too incomplete to determine the time used.

Which parts need back-to-birth records most?

Life-limited parts, such as engine disks and some landing gear components, whose hours or cycles are capped. Buyers ask for full history on these because the remaining life is what they are paying for.

Sources

  1. 14 CFR 43.10, Disposition of life-limited aircraft parts
  2. 14 CFR 91.417, Maintenance records
  3. 14 CFR 121.380, Maintenance recording requirements
  4. FAA Office of the Chief Counsel, Determining Life Status of Life-Limited Parts (2009)
  5. EASA FAQ: the term “back to birth”
  6. EASA Easy Access Rules for Continuing Airworthiness (M.A.305, ML.A.305 and AMC)
  7. FAA AC 20-62E, Eligibility, Quality, and Identification of Aeronautical Replacement Parts
  8. ASA: ASA-100 quality standard
What is ATA Spec 106?What ATA Spec 106 is, what its traceability form records, when parts traders use it, and why it is not an airworthiness release like an 8130-3 or Form 1.FAA Form 8130-3 vs EASA Form 1How FAA Form 8130-3 and EASA Form 1 differ, which one a new or repaired part should carry, what a dual release is, and common paperwork mistakes.Aircraft part condition codes: NE, NS, OH, SV, AR and the restWhat the aircraft part condition codes NE, NS, OH, RP, SV, AR and the rest mean, which ones a rule defines, and how traders compare quotes across them.

Keep the trace with the part.

See how Fenavia carries trace details from receiving to the ATA 106 form, with your own stock.

Book a demo